the best brands are memorex and verbatim [disc's]
2. Download some tools
abgx360
ImgBurn
Wx360
megaupload.com/?d=QBITZ9JM - Updated link to include the setup.exe for abgx360
3. You will need to download a call of duty World at War iso. and some modded files
I will not link to a download because it is illegal and it considered warez
Make sure that the iso is for your region
Pal = England/Australia
NTSC = America
Region Free = Everyone ~ Recommended.
Now you will need to download the modded files for CodWaW Zombies
-Code_post_gfx.ff
-Nazi_zombie_prototype.ff
-Common.ff
3.5. Download some modded files for Call of duty World at War
(You can find these in this forum)
4. One you have the modded files and the CodWaW .iso you can continue.
Open abgx360 GUI
Go to the 'autofix' Tab
Make your settings as mine are.
[You must be registered and logged in to see this link.]
Go to "misc' Tab and Press select where is says "Choose your console's region code.
Tick the corrent box and press OK
Go to the 'Option' tab and make your settings like mine.
[You must be registered and logged in to see this link.]
Go to File > Save settings... and save the settings. Load these settings everytime you use abgx360.
Now go to File > Open input and open the CodWaW .Iso
Press Launch, located at the bottom of the program and it will start checking your iso for errors. Wait until it says press any key to exit..
If everything is green, that means you have a working .iso
If certain things are red, than this means your .iso is bad and you will need to re download a new one.
5. Open wx360. Go to file > Open. Open your iso for CodWaW
When opened it will look like this.
[You must be registered and logged in to see this link.]
Now this is very important, Go down until you see default.xex, Right click and extract to desktop.
Go up to Code_Post_Gfx.ff and replace with the modded file you downloaded.
Go down to Common.ff and replace with the modded file you downloaded
Go down to nazi_zombie_prototype.ff and replace with the modded file you downloaded.
Wait until they are done.
Replace the default.xex with the one you extracted to the desktop
(we do this because when you replace the other files with the modded one the default.xex gets corrupted. So we replace it after with the uncorrupted one.)
Exit out of wx360
6. Open ImgBurn
Go to Tools > Settings > Write tab
Copy the following settings.
[You must be registered and logged in to see this link.]
Press Ok
Now press write Image File to disk
[You must be registered and logged in to see this link.]
Choose your speed for burning (I suggest 2.4 or 2 for it to properly burn without any mistakes)
Go to open file.. You should of noticed the .dvd file that you have
IMPORTANT: Make sure you open the .dvd file. NOT the .iso file.
ImgBurn should look like this.
[You must be registered and logged in to see this link.]
Now burn the disk
After a while it will pop-up with something that says "Failed to close dvd tray, close the tray and press ok"
Close the tray and press OK.
It will verify your disk.
Wait until this is done then you will hear a nice little jingle informing you that your disk is done.
HotSwapping Video Tutorial
[You must be registered and logged in to see this link.]
Hope i helped some people and if you have any questions you can Private Message me or make a post
Do not message me asking for the ISO, use pirate bay.
2. Download some tools
abgx360
ImgBurn
Wx360
megaupload.com/?d=QBITZ9JM - Updated link to include the setup.exe for abgx360
3. You will need to download a call of duty World at War iso. and some modded files
I will not link to a download because it is illegal and it considered warez
Make sure that the iso is for your region
Pal = England/Australia
NTSC = America
Region Free = Everyone ~ Recommended.
Now you will need to download the modded files for CodWaW Zombies
-Code_post_gfx.ff
-Nazi_zombie_prototype.ff
-Common.ff
3.5. Download some modded files for Call of duty World at War
(You can find these in this forum)
4. One you have the modded files and the CodWaW .iso you can continue.
Open abgx360 GUI
Go to the 'autofix' Tab
Make your settings as mine are.
[You must be registered and logged in to see this link.]
Go to "misc' Tab and Press select where is says "Choose your console's region code.
Tick the corrent box and press OK
Go to the 'Option' tab and make your settings like mine.
[You must be registered and logged in to see this link.]
Go to File > Save settings... and save the settings. Load these settings everytime you use abgx360.
Now go to File > Open input and open the CodWaW .Iso
Press Launch, located at the bottom of the program and it will start checking your iso for errors. Wait until it says press any key to exit..
If everything is green, that means you have a working .iso
If certain things are red, than this means your .iso is bad and you will need to re download a new one.
5. Open wx360. Go to file > Open. Open your iso for CodWaW
When opened it will look like this.
[You must be registered and logged in to see this link.]
Now this is very important, Go down until you see default.xex, Right click and extract to desktop.
Go up to Code_Post_Gfx.ff and replace with the modded file you downloaded.
Go down to Common.ff and replace with the modded file you downloaded
Go down to nazi_zombie_prototype.ff and replace with the modded file you downloaded.
Wait until they are done.
Replace the default.xex with the one you extracted to the desktop
(we do this because when you replace the other files with the modded one the default.xex gets corrupted. So we replace it after with the uncorrupted one.)
Exit out of wx360
6. Open ImgBurn
Go to Tools > Settings > Write tab
Copy the following settings.
[You must be registered and logged in to see this link.]
Press Ok
Now press write Image File to disk
[You must be registered and logged in to see this link.]
Choose your speed for burning (I suggest 2.4 or 2 for it to properly burn without any mistakes)
Go to open file.. You should of noticed the .dvd file that you have
IMPORTANT: Make sure you open the .dvd file. NOT the .iso file.
ImgBurn should look like this.
[You must be registered and logged in to see this link.]
Now burn the disk
After a while it will pop-up with something that says "Failed to close dvd tray, close the tray and press ok"
Close the tray and press OK.
It will verify your disk.
Wait until this is done then you will hear a nice little jingle informing you that your disk is done.
HotSwapping Video Tutorial
[You must be registered and logged in to see this link.]
Hope i helped some people and if you have any questions you can Private Message me or make a post
Do not message me asking for the ISO, use pirate bay.
7/11/2021, 11:51 pm by Faytal
» 4/22/2020!!
4/22/2020, 10:49 pm by Faytal
» 2/26/2018 Yoooo
2/26/2018, 1:57 am by Faytal
» Lol hi
2/26/2018, 1:56 am by Faytal
» wat type of should i get
8/29/2012, 1:34 pm by thecheater114
» iColor's Xp Lobby | FREE | Rental Times |
4/7/2012, 8:25 pm by Faytal
» Hey guys i'm getting a new phone!
11/17/2011, 10:54 pm by Gatorade
» MW3 SplitScreen Editor (Unlock All)
11/16/2011, 10:18 pm by Gatorade
» MW3 Unlock All!
11/16/2011, 9:13 pm by Gatorade